FESTOOL 18V Brushless T 18 2-Speed Drill in Systainer Skin 576448

For quick changes between drilling and screwdriving.

Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment. CENTROTEC quick-change system. as well as angle attachment. eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18+3 cordless drill is light. long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE. giving you peace of mind for your day-to-day work. Available in T-design or – depending on personal preference – in the unique C-design as the C 18.

• Furniture assembly and kitchen fitting
• Installation of fittings. rear walls. strips
• Installation of doors and windows. and drilling and screwdriving in wood. metal and plastic
• Fences. pergolas. carports. canopies
• Production of wooden substructures

Intelligent motor management – The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature. voltage and current consumption of the motor. electronics and battery.

Durable and extremely light – The Li-HighPower Compact battery guarantees full power. while weighing considerably less. To provide even more endurance. the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.

Work comfortably – The light T-design. the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.

Ideal for tight spaces – As with all cordless drills from Festool. the bits can also be inserted in the direct bit holder of the spindle on the T 18.

Six bits always to hand – The practical bit holder provides space for up to six bits – magnetically secured against falling out.

In the smallest of spaces – The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

Living on the edge – Every screw can be reached with the eccentric adapter.

CENTROTEC quick-change system – Fast change between drilling. countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and. at the same time. 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

Chuck for standard tools – The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

Optimum power performance – Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained. even when drilling takes place at maximum torque.

Optimal lighting – The integrated LED light permits precise work even in dark corners.

Specifications

• Battery Capacity: 3.1/4.0 Ah
• Gears: 2
• No Load Speed: 1st Gear: 0 – 450 min?¹ | 2nd Gear: 0 – 1500 min?¹
• Torque Adjustment: 1st Gear: 0.8 – 8 Nm | 2nd Gear: 0.5 – 6 Nm
• Maximum Torque Wood: 35 Nm
• Maximum Torque Steel: 50 Nm
• Drilling Diameter Wood: 45 mm
• Drilling Diameter Steel: 13 mm
• Chuck Range: 1.5 – 13 mm

*Batteries & Charger Not Included